产品列表
路沿石钢模具
盖板钢模具
标志桩钢模具
隔离墩钢模具
化粪池钢模具
U型槽钢模具
遮板钢模具
道轨模具
护坡钢模具
制砖机
检查井钢模具
声屏障钢模具
防撞墙钢模具
围墙板模具
方涵模具
锚杆框架梁模具
配重块模具
水泥三盘模具
水泥预制件模具
      新闻中心
· 跌水井模具-热力井模具-水...
· 流水槽模具-排水槽模具-水...
· 风电基础钢模板的生产原理分...
· 光伏墩模具的基本介绍
· 观察井模具的设计及制作细节
· 电缆井模具的制作特点及优势
      联系我们

电话:0312-8103818 18803129528
传真:0312-8103818
在线QQ:107108222
地址:保定市城东工业区

     新闻中心

光伏墩模具的基本介绍

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

光伏墩模具的介绍由于其自身具有的许多的优势而拥有很大的销售量,这种模具在使用的过程中有一些需要我们注意的地方。我们的这种模具在使用的过程中是容易被磨损的,所以在使用的过程中需要轻拿轻放。还有我们在制作之前要将模具表面的污渍清理干净,以免在生产的光伏底座里面混入许多的杂事。我们还要在模具的每个角落都刷上油,这样脱模的过程就不会对产品造成破坏了。光伏墩模具尺寸齐全,方形:30*30*30,35*35*30,40*40*20,40*40*30,40*40*36,40*40*50,45*45*30。圆形:直径40*35,

The introduction of photovoltaic base mold has a large sales volume due to its many advantages. There are some places that need our attention in the process of using this mold. Our mold is easy to be worn in the process of use, so it needs to be handled with care in the process of use. In addition, we should clean the stains on the mold surface before making, so as not to mix a lot of chores into the photovoltaic base. We also need to paint every corner of the mold, so that the demoulding process will not damage the product.PV pier molds are complete in size, square: 30 * 30 * 30, 35 * 35 * 30, 40 * 40 * 20, 40 * 40 * 30, 40 * 40 * 36, 40 * 40 * 50, 45 * 45 * 30. Circular: diameter 40 * 35,

光伏墩模具的抗压能力是非常有限的,如果在使用的过程中超过模具的承受压力那么会使模具发生漏浆甚至断裂,这样就会造成材料的浪费。还有就是我们在振动的过程中需要保证混凝土之间的紧密结合,不然生产出来的模具的表面是不够光滑的。我们在脱模的时候要等待光伏底座模具内部的混凝土的凝固度足够了在进行。这就是我们制作光伏底座的过程中需要注意的地方,我们需要对这些东西有所了解,这样生产出来的光伏底座的质量才能有很好的保证。

The compressive capacity of the PV base mold is very limited. If the pressure exceeds the bearing pressure of the mold in the process of use, the mold will leak slurry or even break, which will cause a waste of materials. In addition, we need to ensure the close combination between concrete in the process of vibration, otherwise the surface of the produced mold is not smooth enough. When demoulding, we have to wait for the concrete inside the PV base mold to solidify enough. This is what we need to pay attention to in the process of making photovoltaic base. We need to understand these things so that the quality of photovoltaic base can be well guaranteed.


【上一个】 风电基础钢模板的生产原理分析 【下一个】 观察井模具的设计及制作细节


 · 光伏墩模具的基本介绍

检查井钢模具,检查井模具,水泥检查井模具——保定市晨泽模具制造有限公司 |隔离墩模具|排水沟模具|